Open: 8AM – 8PM | Mon-Fri

The Fortera Fencing Installation Difference

We drive eight-foot posts four feet into the ground instead of setting them in concrete. That’s the iDrive Power System, and it’s why every Fortera fence is a 100 mph wind-certified installation.

Free estimateNo obligationNo deposit requiredLicensed and insured

White Vinyl Fence by Fortera Fencing

What Does "No-Dig" Fence Installation Mean?

No-dig installation means the posts get driven into the ground instead of set in concrete. No hole, no concrete waiting to harden before the fence goes up.

A traditional install

A fencing contractor digs a hole about two feet deep, sets a post in it, and fills the hole with concrete. Making that hole means taking out the packed soil that was holding the fence up. What surrounds the concrete afterward is loose dirt.

In Northeast Florida, heavy rain soaks that loose dirt and the concrete starts to shift. The post is only as steady as the loose dirt around it, and it gives a little more with every gust of wind.

The iDrive Power System install

We drive the post four feet into the ground. Driving packs the soil tight around the post instead of taking it out, so the post is gripped by ground nobody has loosened.

The post runs four feet into the ground and four feet above it, and the fence anchors to that post. Whether it’s a four feet tall fence or ten, the post is what withstands the wind.

Wood, vinyl, and chain link fences get a galvanized steel post. Aluminum fences get an aluminum I-post. 

That is what a 100 mph wind-certified installation is.

idrive power system fence vs traditional

Your Source for the 100 mph Wind-Certified Installation

Digging loosens the soil that holds a fence up. Driving packs it.

Your Source for the 100 mph Wind-Certified Installation.

What that means for your property

  • A stronger foundation, 10x stronger than a traditional fence installation
  • A cleaner installation with minimal yard disturbance
  • Faster completion, with nothing waiting on concrete to cure
  • Posts that resist leaning, sinking, and long-term movement
  • A fence built as a complete system, not isolated parts
  • A 100 mph wind-certified installed fence

Two Kinds of “No-Dig” Fencing

The words are identical. The products are not. Almost everything written about no-dig fencing online is about the one on the left.

The hardware store kit

A panel on a spike anchor

A short metal spike pushed into the top few inches of soil with a fence panel dropped on top. This is what most articles online mean by no-dig, and it is why the words have a reputation problem.

  • A few inches deep, not feet
  • Nothing structural holding the panel up
  • No wind rating of any kind
  • Limited to short, picket styles

The Fortera installation

A steel or aluminum post, driven four feet down

A galvanized steel or aluminum post driven four feet into ground that has never been dug up, with the fence attached to it by brackets. This is the iDrive Power System.

  • Four feet down, into ground nobody has dug up
  • The post withstands the wind, not the fence
  • A 100 mph wind-certified installation
  • Wood, vinyl, aluminum, chain link, and mixed materials
  • Any fence style, any height

Us Versus Them

Same fence, three different foundations. Only one of them is certified to 100 mph.

Swipe to compare
iDrive Power SystemWhat Fortera installs Traditional concrete installMost local contractors Big-box no-dig kitHardware store
Wind ratingCertified to 100 mphNot ratedNone
What goes in the groundA structural post driven 4 feetA post in a hole, packed with concreteA short spike
DepthFour feetAbout two feetA few inches
Effect on the soilPacks it tight around the postDigs it out and leaves loose dirtAlmost none
What withstands the windThe post, four feet down and four feet upThe post, sitting in loose dirtThe panel and its spike
Time to finishSame day or next dayMultiple days waiting on concreteYour weekend
Yard impactMinimalLarge holes and dirt pilesMinimal
Score7 of 70 of 71 of 7

Watch the iDrive Power System Installation by Fortera Fencing

What You’ll Read About “No-Dig” Fencing, and What’s True in Florida

Every claim below is something a homeowner can find online, and something you may have already heard on an estimate.

“No-dig means a spike you tap into the ground.”

That is the panel kit from the hardware store. A few inches deep, four feet tall at most, picket styles only. Ours is a steel or aluminum post driven four feet down with the fence attached to it. 

“Concrete spreads the load over a bigger surface.”

Only while the soil around it holds still. Concrete is only as steady as the loose dirt it sits in, and saturated Florida soil does not hold still.

“Driving posts is a shortcut contractors use to save money.”

It is the opposite. Four feet of driven post is twice the fence in the ground that a typical two-foot footing gives you, and it is what earns the 100 mph wind certification. Shortcuts do not get certified.

“You’ll hit a utility line driving a post.”

We call for utility locates before a single post goes in the ground, on every project. That is the free service that marks buried power, gas, water, and cable lines. We also pull permits when applicable.

Why a Fortera Fence Is the Better Long-Term Value

A fence is only as good as what holds it up. Here is what goes into every one of ours.

What you get on every Fortera fence

  • A fence with structural posts driven 4 feet deep to withstand wind
  • A 100 mph wind-certified installation
  • Our own specialized crew, never a subcontractor
  • A lifetime workmanship warranty and the manufacturer’s material warranty
  • Free estimate, no obligation, and no deposit required

Five questions worth asking any fence contractor

  1. How deep do the posts go?
  2. What are the posts made of?
  3. Is my fence attached to a steel or aluminum post, or is the fence holding itself up?
  4. Does the crew work for the company, or is it subcontracted?
  5. What wind rating for the fence?

The Fortera Fencing Superior Experience

Our customer experience also sets us apart from traditional fence installation and other contractors. We believe the difference is in how we serve, how we communicate, and how well we deliver at every step of the process.

A customer experience that sets us apart

We treat every customer like they’re our most important one, because they are. From your first call to final installation, you’ll feel taken care of every step of the way.

Easy and enjoyable to work with

No runaround. No headaches. Just a simple, well-organized process with a team that’s responsive, helpful, and easy to communicate with.

Professionalism you can count on

We answer the phone, show up on time, do what we say we’re going to do, and communicate clearly throughout your project.

Quality that lasts

High-quality materials and skilled installation practices, for a fence that looks great and stands the test of time.

Real value for your investment

When you combine top-tier materials, expert workmanship, and a best-in-class customer experience, you get a level of value that’s hard to match.

Premium Fencing. Superior Experience.

Duval, Nassau, Clay, St. Johns, Baker, and Flagler counties.

5 Star Rated From 55+ Google Reviews

Here is what customers in Northeast Florida say.

★︎★︎★︎★︎★︎

The entire team was very professional, answered all of our questions and communicated throughout the entire process. An honest company that operates with integrity.

Debbie S.

Google review
★︎★︎★︎★︎★︎

The entire experience was seamless, transparent and most of all professional. There was a clear plan from start to finish and that plan was executed in a timely fashion.

Thomas M.
Google review
★︎★︎★︎★︎★︎

 The entire process was smooth and stress-free. I highly recommend this company to anyone looking for reliable, honest and professional service.

Susan C.
Google review
Aluminum Fence Installation with fortera fencing employee and happy customer
Fortera Fencing white vinyl fence
Natural Wood Fence by Fortera Fencing

The Fortera Process

From your initial estimate to final installation, our streamlined process makes doing business with Fortera easy and enjoyable.

1

Schedule Your Estimate

Schedule Your Estimate

Give us a call, and we will get your estimate scheduled at a time that works for you.
2

Design and Get Your Price

Design and Get Your Price

We’ll walk your property, take measurements, and help you choose the right materials and layout. You’ll get a proposal onsite.
3

Install and 
Enjoy

Install and 
Enjoy

Once approved, we schedule your project and handle the installation from start to finish, so you can enjoy a fence that looks great and lasts.

Frequently Asked Questions

What does “no-dig” fence installation mean?

It means the posts are driven into the ground instead of set in concrete. No hole gets dug, so the post ends up in ground that has never been disturbed. That is how every Fortera fence goes in, using the iDrive Power System.

Every fence we install is a 100 mph wind-certified installation. The fence attaches to a steel or aluminum post that runs four feet below the ground and four feet above it, so the post withstands the wind instead of the fence.

It is the driven-post installation method Fortera is certified to install, and we call it iDrive for short. A galvanized steel or aluminum post goes four feet or deeper into ground that has never been dug up. The fence attaches to that post with brackets, and the whole fence is built as one system on that foundation.

Yes, and a privacy fence is where it matters most, because a solid fence catches the most wind. The fence attaches to a steel or aluminum post with brackets. That post runs four feet below the ground and four feet above it, so the post withstands the wind instead of the fence. Every fence we install is a 100 mph wind-certified installation.

Two feet is what a typical concrete footing gets, and it is a big part of why so many Florida fences start leaning. Florida soil soaks up water and moves, and a two-foot footing moves with it. We drive four feet.

Wood, vinyl, aluminum, chain link, and mixed-material fences. Wood gets no buried wood and less rot risk. Vinyl gets a steel-reinforced internal structure. Aluminum gets commercial-grade aluminum I-posts. Chain link gets a deeper, stronger driven foundation. A fence that mixes materials gets whichever post each section needs.

Most residential fences go in the same day or the next. Nothing has to cure before your fence is finished.

In Florida, a permit is required when a home improvement project costs more than $7,500. Under that, no permit is needed. When one does apply, it goes through your local municipality, and we file it along with the utility locates before the install date. You do not have to chase any of it.

Three parts. A lifetime workmanship warranty on our installation, a 100 mph wind warranty on the fence, and the manufacturer’s material warranty on the fence material itself.

Call to Schedule Your Free Estimate Now

Get started today with a free estimate and experience the professional, easy, and dependable service that sets Fortera Fencing apart.